Miami Heat
3D MODEL DESCRIPTION
Hello friend, today I wanted to bring on my profile, another fantastic logo to print, as well as the beautiful logo of the Miami Heat, one of the logos that I really like very much.
The logo is composed of several pieces, in such a way as to be able to print the relevant pieces, of the relative color of the team.
The maximum frame size is 185 x 139 x 30, I recommend printing the frame at 0.15 and the remaining pieces with a filling ranging from 0.7 to 0.10.
I want to remind you, to follow me, to stay updated on the new projects that I will bring to my profile, as well as all the logos that make up the NBA.
If you have any ideas, and want you to realize it, contact me in the messages section, I will realize, what you want most.
I also want to remind you that almost all my projects are interlocking, and have a tolerance ranging from 0.35 to 0.50mm, depending on the project I go to work, I apply the right tolerance "tolerance standard of all printers"If you, like many others, don’t know what tolerance your printer has, I suggest you download my tolerance test, you can find it on my profile.
As always I want to thank you for spending your time viewing my project, and if you find it interesting, I suggest you take a look at my cults profile, because you will find a lot of interesting projects, and I’m sure you’ll find something that will do for you, I also remind you to leave me a like if you appreciate my work and follow me.
Good press friend for anything, contact me via messages.
3D PRINTING SETTINGS
Layer 0.10 / 0.15
Temp 205° / 50° PLA --- 230° / 65° PETG
Infill 10%
Top and Bottom Layer 4
Perimeter Layer 3
No support
Speed 50/60 mm/s
Nessun commento:
Posta un commento